User's Manual

FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions (1)this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
CE NB Statement
Herby, OUTFORM SCIENCE AND TECHNOLOGY (SHENZHEN) CO., LTD declares that this
iDISPLAY 15.6" Display，UIT515B-B02 is in compliance with the essential requirements and
other relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2) and
Article 10(10), this product allowed to be used in all EU member states.
Use the iDISPLAY 15.6" Display in the environment with the temperature between 0℃ and
40℃,
Use careful with the earphone maybe possible excessive sound pressure from earphones and
headphones can cause hearing loss.
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries
according to the instructions.
The product shall only be connected to a USB interface of version USB2.0
Adapter shall be installed near the equipment and shall be easily accessible.
The plug considered as disconnect device of adapter
Adapter Model: FJ-SW20261203000
Input: AC 100-240V, 50/60Hz, 1.5A Max Output: DC 12.0V, 3.0A, 36.0W
Operation Frequency:
For BT/BLE: 2402MHz~2480MHz
For 2.4G WIFI:
2412MHz~2472MHz (802.11b/802.11g/802.11n(HT20))
For 5G WIFI:
5150MHz~5250MHz, 5725MHz~5875MHz
For GPS: 1.57542GHz
Max Output Power:
For BT: 0.0032W
For BLE:0.0027W
For 2.4G WIFI:0.181W
For 5G WIFI: 0.048W
Manufacturer：OUTFORM SCIENCE AND TECHNOLOGY (SHENZHEN) CO., LTD
Address：BUILDING A FIRST FLOOR, HUADA PLAZA, GONGYE 3RD
ROAD, SHEKOU, NANSHAN DISTRICT, SHENZHEN, CHINA 518067
E-mail: [e-mail]