Outdoor LED Light Strips Manual

7
Installation Diagram
If installing Light kit on an Outdoor Greatroom Product, it is suggested to run wiring
through gap in the access door in the base, in order to keep wiring hidden and out of the
way. If desired, a 5/8” hole can be drilled through the base to feed LED extension wires
through, and wiring can be completed inside the base. Mounting tabs on the power
supply can be used to mount power supply to fire pit frame to keep it out of the way of
propane tank, wires, etc...
*Installation shown on Key Largo Fire Pit. Your installation may vary.*
Power Supply
Splitter
Controller
Light Strip
110V plug
Feed wires
through gap in
access door, or
other opening.
Door
Mounting Tabs for
Power supply