Outdoor LED Light Strips Manual

Installation Instructions

(Your installation may vary)

Before installing Light Kit, remove all components from box and make

sure all components are included and working properly.

Avoid Bending Strips at sharp angles, this can put stress on the strip and

cause it to fail over time

Keep wires away from hot surfaces of burner

1. Lay out LED strips and wiring to ensure you have enough wiring to

complete your installation.

2. Ensure mounting surfaces are clean and free of debris. Use rubbing

alcohol to remove dirt and dust from surfaces.

 Adhesive backing will stick to glass, supercast, granite, wood,

metal and most other surfaces.

 For a more permanent bond, any liquid adhesive that is

compatible with your mounting surface will work.

3. Remove plastic backing on LED strips to expose adhesive foam.

4. Adhere LED strips to the desired mounting surface, press firmly on the

strips to ensure good adhesion of the foam backing to the surface.

 Use provided plastic wiring clips to secure the extension wires

in the location you desire. Keep wires away from hot surfaces

of the burner and out of the way of burner connections.