Manual For Folding Glass Guards

CONVERTING TO COVER / TABLETOP CONFIGURATION
3.
outdoorrooms.com42496 REV A 10-31-18
CARE AND MAINTENANCE
4.
Clean glass with water, vinegar or a streak- free
glass cleaner and soft cloth.
Never attempt to clean glass while hot.
WARNING
Do not touch glass while the re pit is in operation.
Glass will remain hot for approximately 20 minutes
after shutting down the re pit. Do not touch the
wind guard until the glass has fully cooled to avoid
serious injury.
HOT GLASS WILL CAUSE
BURNS
• Keep children away
• CAREFULLY SUPERVISE children near re pit.
• Alert children and adults to hazards of high
temperatures.
• High temperatures may ignite clothing or other
ammable materials.
• Clothing, furniture and other ammable materials
must not be placed on or near the glass guard.
• Do not leave appliance unattended while
burning.
DO NOT TOUCH GLASS
UNTIL COOLED
NEVER ALLOW CHILDREN
TO TOUCH GLASS
WARNING
WAIT FOR GLASS TO FULLY COOL BEFORE
HANDLING.
B. Remove one of the short sides from
the frame and lay at onto the ange
of the frame.
C. Repeat step B with the other short panel.
WARNING
NEVER OPERATE FIRE PIT WITH THE GLASS
DOWN IN THE TABLE TOP CONFIGURATION.
D. Remove the long glass panel from the
frame and lay at on top of the short
glass panel.
3
WARNING
Do not operate re pit with cracked, chipped or
damaged glass panels.
Replace any damaged glass before using this
assembly with re pit.
A. Wait for glass to cool before converting
cover/tabletop conguration.
E. Repeat step D with the other long panel.