Instructions / Assembly
INSTALLATION INSTRUCTIONS
Please read entire instruction sheet before you begin.
Follow these instructions and recommendations to install panels within warranty, and to avoid product damage.
INSTALLATION EXAMPLES
WHAT'S IN THE BOX
75" 52"
1 1
Post – Black powder-coated galvanized steel; welded base plate
4 4
Negative Carbon
Footprint Mill
Negative Carbon
Emissions
Temperature, UV &
Weather Resistant
Chemical
Adhesives
Panel Border
Drill Guide
Panel Border
Drill Guide
Drill Guide
10-Year Material
Warranty
100% CMYK BLACK
Wood Post Screws & Washers – ⁵⁄₁₆"use ¹⁹⁄₆ ₄" drill bit
4 4
Negative Carbon
Footprint Mill
Negative Carbon
Emissions
Temperature, UV &
Weather Resistant
Chemical
Adhesives
Panel Border
Drill Guide
Panel Border
Drill Guide
Drill Guide
10-Year Material
Warranty
100% CMYK BLACK
Masonry Post Screws –
²⁵⁄₆₄
"¼"use
⁵⁄₁₆
" drill bit
1 1
Negative Carbon
Footprint Mill
Negative Carbon
Emissions
Temperature, UV &
Weather Resistant
Chemical
Adhesives
Panel Border
Drill Guide
Panel Border
Drill Guide
Drill Guide
10-Year Material
Warranty
100% CMYK BLACK
Poly Post Cap
12 8
Negative Carbon
Footprint Mill
Negative Carbon
Emissions
Temperature, UV &
Weather Resistant
Chemical
Adhesives
Panel Border
Drill Guide
Panel Border
Drill Guide
Drill Guide
10-Year Material
Warranty
100% CMYK BLACK
Poly Post Hole Plugs
Illustrations not to scale.
Black posts and channels
rendered in gray.
Posts
•
Black powder-coated
galvanized steel
(Fig. 1)
.
•
Welded base plates for
surface mounting
(Fig. 1)
•
Pre-drilled post holes
align with the slots in all
OUTDECO USA Panel
Frame and Slat Fence Kit
channels for quick and
easy installation with
no measuring
(Fig.2)
.
(See Kit installation instructions.)
•
Posts are pre-drilled on
3 sides allowing for linear
(Fig. 5)
or 90° corner
(Fig. 6)
•
Screws for masonry
& wood included.
Suitable for
pro builders
and DIY crafters.
75" & 52" Surface-Mount Posts
PLEASE READ INSTRUCTIONS COMPLETELY BEFORE YOU BEGIN:
We recommend following best building
practices for installing OUTDECO USA Steel Posts and Frames in accordance with their intended purpose. Examples
requirements. If in doubt, consult a professional. We recommend checking with proper authorities about building
codes/standards that may apply to your project. The OUTDECO USA Post & Frame System has a 5-Year Limited
Warranty for material integrity when installed per these instructions. Installers assume responsibility for the
installation. (See full warranty at design-vu.com/post-frame or modinexpanels.com/post-frame.)
System Components
& Features
Panel Frame & Slat Fence Kit Channels
(Sold separately.)
All channel sizes
have slots that
directly align
with pre-drilled
post holes for easy
installation
(Fig. 2)
.
Panel Frame Kits:
hold Design-Vu
and Modinex
Decorative Panels.
Slat Fence Kit:
Channels adjust
⁵⁄₈¾
36" Channel
48" Channel
Pre-drilled Post
72" Channel
24" Channel
Fig. 2
Installing Posts on Wood or Masonry Surfaces
DO NOT install posts before attaching Panel Frame or
Slat Fence Kit channels. See Kit instructions.
1.
Insert Post Caps on top of posts.
2.
Position undrilled side of post as
the front of your front.
3.
Pre-drill wood
(
¹⁹⁄₆₄" drill bit )
or
masonry surface
(
⁵⁄₁₆" drill bit).
4.
Check that post is straight.
5.
Bolt down with included
Post Screws
(Fig. 3)
.
6.
Post Hole Plugs into unused
post holes to help prevent
water leaking into posts
(Fig. 4)
.
Fronts of posts
(no drill holes)
Check
that post
is straight.
Bolt down
with post
screws.
Fig. 3
Fig. 1
52" Post 75" Post
Fig. 4
2 - 24" Slat Kits
Fig. 5
1 - 24" x 48" Frame Kit
1 - 24" x 48" Frame
Kit
**
+
1 - 24" Slat Kit
Fig. 6
6 - 24" Slat Kits
1 - 24" x 48"
Frame Kit
**
1 - 36" x 72"
Frame Kit
2 - 36" x 72"
Frame Kits
1 - 24" x 48"
Frame Kit
1 - 72" Slat Kit 1 - 72" Slat Kit
1 - 24" x 48" Frame
Kit
**
+
1 - 24" Slat Kit
75" Posts
52" Posts
**
24" x 48" Panel Frame Kit contains 3 frames. These examples will yield extra frames.
design-vu.com/post-frame modinexpanels.com/post-frame