Instructions / Assembly
Posts (Sold separately.)
•
Pre-drilled post holes and frame channels
align for easy assembly with no measuring
(Fig. 1)
.
•
Posts are pre-drilled on
3 sides allowing for linear or
90
°
corner installations
(Fig. 3)
.
•
See post instructions* for
additional installation details
and for 96" In-Ground Post installations.
*
Post screws for both masonry and wood are included with
75" & 52" posts. (Instructions & hardware are inside post.)
Frame Channels
•
Channels assemble into a frame to hold
3 - 24" x 48" Panels
•
Channel slots directly align with pre-drilled
holes on OUTDECO USA posts
(Fig. 1)
.
•
Channel slots allow for 1" of vertical
adjustment for uneven surfaces
(Fig. 1)
.
•
Channels also attach to existing walls,
(Fig. 2)
.
FENCE LOCATION – IMPORTANT!
INSTALLATION INSTRUCTIONS
Please read entire instruction sheet before you begin.
Follow these instructions and recommendations to install panels within warranty, and to avoid product damage.
to create unique
patterns
(Fig. 4)
.
Check for pattern
you plan your design.
Lay out your panels
in position on a
before
starting your project.
Installing fencing under eaves, patio cover, pergola, etc.,
requires 2½-to-3 feet of clear space above the posts in
order to insert the panels. Without clear space, assemble
(Instructions on p. 2)
Read this entire section before planning your project.
Panels in same
orientation
Middle panel
ipped horizontally
PATTERN ORIENTATION
24" x 48" Panel Frame Kit
PLEASE READ INSTRUCTIONS COMPLETELY BEFORE YOU BEGIN:
We recommend following best building
practices for installing OUTDECO USA Steel Posts and Frames with DESIGN-VU and MODINEX Decorative Panels
in accordance with their intended purpose. Examples shown in this document are installation suggestions. Adjust
recommend checking with proper authorities about building codes/standards that may apply to your project. The
OUTDECO USA Post & Frame System has a 5-Year Limited Warranty for material integrity when installed per these
instructions. Installers assume responsibility for the installation
(See page 4)
.
System Components & Features
WHAT'S IN THE BOX
QTY. ITEM
6
A-Channel –
24"
6
B-Channel – 48"
12
Corner – Poly Frame Corner Connectors
12
Pin – Panel Locking Pins
12
Channel Screws –
6
Corner Locking Screws –" Phillips
1
"
NOTE: Screws for both masonry and wood are included with posts.
1 Panel Frame Kit –
3 Stacked Horizontal Panels
(page 2)
•
3 - 24" x 48" Design-Vu
or Modinex Decorative Panels
•
Posts
*
(sold separately):
–
2 - 75" Posts for 1st Fence Kit
(Fig. 5)
–
1 additional Post for each Frame
Kit added to fence
(Fig. 6)
FENCE CONFIGURATIONS & SHOPPING LIST
ORANGE C=0 M=58 Y=100 K=0
Material
Warranty
1 Panel Frame Kit – 3 Vertical Panels
(page 4)
•
3 - 24" x 48" Design-Vu
or Modinex Decorative Panels
•
Posts
*
(sold separately):
–
4 - 52" Posts for 1st Fence
Kit
(Figs. 7 & 8)
–
3 additional 52" Posts for
each Frame Kit added to fence
Fig. 6
2 Frame Kits
+
1 add'l 75" Post
Fig. 5
1 Frame Kit
+
2 - 75" Posts
24" A-Channel
Pre-drilled Post
48" B-Channel
Panel Orientation Examples
Fig. 1
Fig. 2
Fig. 3
Fig. 4
1 Frame Kit
+
4 - 52" Posts
Linear Installation
Fig. 7
1 Frame Kit
+
4 - 52" Posts
Corner Installation
Fig. 8
Suitable for pro
builders and
DIY crafters.
Installation
requires 2 people.
Illustrations not to scale.
Black posts and channels
rendered in gray.
**
Block height:½ (p. 4).
Cardboard blocks are included, but wood blocks are recommended.
WHAT YOU'LL NEED
See Shopping List below for panel and post needs.
ORANGE C=0 M=58 Y=100 K=0
Material
Warranty
Rubber Mallet
Impact Driver
w
/
Phillips Bit
Tape
Measure
Support Blocks
(Cut from 2x4)
**
Level
Drill
design-vu.com/post-frame modinexpanels.com/post-frame
08-23