Installation Guide

93
ADV/MATE/AGS/MR---------------
end of MUST
RUN menu
UP TOP AGS
ADV/MATE/AGS/PG2-----------------
choose category
LOAD MUST
PG1 START RUN PG3
ADV/MATE/AGS/PG3----------------
choose category
%SOC
PG2 START TIMERS PG4
ToproceedtotheADV/MATE/AGS/PG2screen,
press the <AGS> so key
Press the <P3>sokeytoaccesstheADV/MATE/
AGS/PG3screenwhichincludestheEXERCISE
option.
Press the <START> so key.
WithaFLEXnetDC,ausercanstartagenerator
based on a battery state of charge rather than its
voltage, which can be less accurately inteprepeted
dependingonloadsandsurges.Usethe<INC>
and <DEC> so keys to adjust this value. Press the
<DOWN> so key to view the %SOC stop screen.
A user can stop a generator based on the
percentageofthebattery’sstateofchargeusing
<INC> and <DEC> so keys. Press the <DOWN>
so key to view the FULL CHG screen.
e FULL CHG (CHARGE) screen overrides the
%SOC stop function by establishing a time period
from1-30daysusingthe<INC> and <DEC>
sokeys.WhentheFLEXnetDCmeasureddays
sinceafullchargeexceedsthis1-30dayuser-
determined time, the %SOC stop is ignored and a
full charge takes place. is screen function can be
set to disabledaswell(nofullchargewilloccur).
Press the <DOWN> so key to view the end of
%SOC START menu.
Press the <AGS> so key to view the ADV/MATE/
AGS/PG3 screen.
ADV/MATE/AGS/%SOC--------------
%SOC start %
DOWN AGS INC DEC
ADV/MATE/AGS/%SOC--------------
%SOC stop 90%
DOWN AGS INC DEC
ADV/MATE/AGS/%SOC--------------
end of %SOC
START menu
UP TOP AGS
ADV/MATE/AGS/FULL CHG
charge to 100% full
disabled
DOWN UP INC DEC
State of Charge