Installation Guide

77
AGS Enabled
isistheoverallcontrolfortheAGSMode.If
AGSisnotenabled,noneoftheAGSsettings
orcontrolswillwork.EnabletheAGSrstby
pressing the <YES? so key and then establish
your settings.
AerenablingtheAGSMode,pressthe
<DOWN>sokeytocontinuetotheAGS
Control menu.
isscreenallowstheAGSModetobechanged.
Pressing <CHANGE> brings up a screen that
allowstheusertoswitchchoosefromthreeAGS
control modes sown below.
isscreenoersthreeoptionsforAGScontrol:
• OFFmanuallyde-energizestheFXAUX
orFLEXnetDCrelayoutputandstopsthe
generatorregardlessofanyAGSsetting;thisis
displayedasMAN–OFF.
• AUTOallowsAGSsettingstostartandstop
the generator automatically and is displayed
as either AUTO – ON(whentheAUXis
activated),orAUTO – OFF(whentheAUXis
deactivated).
• ONwillmanuallyenergizetheFXAUXoutput
andstartthegeneratorregardlessofanyAGS
setting; this is displayed as MAN – ON.
• OFF and ON are considered “manual”
selections, hence the MAN-OFF and MAN-ON
screen displays.
Press the <DOWN>sokeytoviewthenext
setup screen.
ADV/MATE/AGS/SETUP------------
AGS enabled: NO
DOWN UP NO YES
ADV/MATE/AGS/SETUP-------------
AGS enabled: YES
DOWN UP NO YES
ADV/MATE/AGS/SETUP-------------
AGS control: MAN-OFF
DOWN UP CHANGE
GEN START CONTROL
currently: MAN-OFF
OFF AUTO ON OK
AGS Control
ADV/MATE/AGS/SETUP-------------
AGS control: MAN-OFF
DOWN UP CHANGE