Installation Guide

AC INPUT CONTROL

Currently:USE

DROP USE OK

Push the <AC IN> hot key to view the AC status

andchangetoUSEorDROPasneeded.Pressing

the <OK> so key means you accept the condi-

tions or mode shown on the screen.

BecauseGRID-USEModeusestheDROPandUSEcommands,itcannotbeenabledatthe

sametimeasHBXMode.EnablingGRID-USEwillautomaticallydisableHBXMode

NOTE:EvenwithHBXenabled,theusercanissuemanualDROPorUSEcommandsusing

theACINPUTCONTROLfoundundertheACINhotkey.Onceamanualcommandis

issued,thesystemwillremaininthatchosencommanduntilthenextHBXscheduledcycle

normally occurs.

MAIN-------------------

1:35:04p

SUM STATUS SETUP ADV