Installation Guide

46
FX STATUS WARN(ING) Screens
STATUS/FX/PAGE2-----------------
choose category:
PG1 ERROR WARN PG3
STATUS/FX/WARN-------------P00
acin freq No
too low
DOWN UP TOP PORT
STATUS/FX/WARN-------------P00
acin freq No
too high
DOWN STATUS PORT
STATUS/FX/WARN--------------P00
acin voltage No
too high
DOWN UP TOP PORT
STATUS/FX/WARN-------------P00
acin input No
current exceeds max
DOWN UP TOP PORT
STATUS/FX/WARN-------------P00
acin voltage No
too low
DOWN UP TOP PORT
STATUS/FX/WARN-------------P00
temperature No
sensor fault
DOWN UP TOP PORT
STATUS/FX/WARN--------------P00
internal fan No
failure detected
DOWN UP TOP PORT
STATUS/FX/WARN-------------P00
internal comm No
error detected
DOWN UP TOP PORT
STATUS/FX/WARN------------P00
airtemp 190
DOWN UP PORT
STATUS/FX/WARN-----------P00
captemp 186
DOWN UP PORT
STATUS/FX/WARN-----------P00
fettemp 184
DOWN UP PORT
STATUS/FX/WARN------------------
end of warnings menu
UP TOP STATUS
STATUS/FX/PAGE2-----------------
choose category:
PG2 DISCON SELL MAIN
STATUS/FX/PAGE2------------------
choose category:
PG1 ERROR WARN PG3
WARN(ING) Screens
• acin freq too high:ACsourceisabove66Hz*(upperlimit)andwillbedroppediffrequencygetsmuchhigher
• acin freq too low:ACsourceisunder54Hz**(lowerlimit)andwillbedroppediffrequencygetsmuchlower
• acin voltage too high:ACsource’svoltageisover140VAC***(defaultlimit)andriskslossofFXconnection
• acin voltage too low:ACsource’svoltageisunder108VAC****(defaultlimit)andriskslossofFXconnection
• acin input current exceeds max:ACloadsaredrawingmorecurrentthantheratingoftheFXallows
• temperature sensor fault:aninternalFXtemperaturesensorismalfunctioning
• internal comm error detected:thereisacommunicationproblembetweentheMATEandtheFX
• internal fan failure detected:theFX’sinternalcoolingfanisnotoperatingproperly
• airtemp:displaysanumericvaluerepresentingtheairtemperaturearoundtheFX*
• fettemp:displaysanumericvaluerepresentingthetemperatureoftheFETs(FieldEectTransistors)*
• captemp: displays a numeric value representing the temperature of the ripple capacitors
(esevaluesareusedfortroubleshootingpurposes.ehigherthenumericalvalue,thecoolerthetemperature.)
International FX *56 Hz **44 Hz ***270 VAC ****207
Push <DISCON>toviewtheDISCONNECTMenu