Installation Guide

43
Charge P00
inv 0.0kw zer 0.0kw
chg 0.0kw buy 0.0 kw
DOWN STATUS PORT
STATUS/FX/METER---------P00
input 118 vac
voltage
DOWN UP TOP PORT
STATUS/FX/METER---------P00
output 117 vac
voltage
DOWN UP TOP PORT
FX STATUS METER Screens
STATUS/FX/METER------------P00
inverter 0.0 aac
current
DOWN UP TOP PORT
STATUS/FX/METER--------P00
input 0.0 aac
current
DOWN UP TOP PORT
STATUS/FX/METER----------P00
charger 0.0 aac
current
DOWN UP TOP PORT
STATUS/FX/METER----------P00
sell 0.0 aac
current
DOWN UP TOP PORT
STATUS/FX/METER---------------
end of meter menu
UP TOP STATUS
STATUS/FX/METER---------P00
FX rmware 61
revision
DOWN UP TOP PORT
Push <UP> to
return to the rst
METERscreen.
Push <STAT>
to return to the
“choose category”
STATUSscreen.
Pressing the <BATT> so key brings
uptherstFXBATTscreen.
STATUS/FX/PAGE 1----------------
choose category:
MODES METER BATT PG2
METER Screens
eMETERscreensdisplaycurrentandvoltage
measure-mentsandtheversionofFXsoware.
• charge:thecurrentFXmode
• output voltage:availableACattheFXACoutput
• input voltage:availableACattheFXACinput,
normally from a utility or a generator
• inverter current:availablecurrentatFXACoutput
terminalswhentheinverterisONandnoAC
source is connected
• charger current: shows the amount of AC current
usedbytheFXcharger
• input current:ACcurrentowingintotheFXAC
input
• sell current: AC current being sold to the grid
• FX rmware:currentFXsowareversion
eMETERMODEvaluescannotbechangedinthe
STATUSscreens.
e rst METER screen shows what the
inverter is doing at the time this screen
is viewed. A grid-tied FX will also
show any target activity. e lists below
show the possible activities and target
activities. An o-grid FX will only show
the current activity.
Activity
O
Search
On
Charge
Silent
Float
EQ
Chr O
Support
Sell
Passthru
Target Activity
Sell
RE
Float
Bulk EQ