Installation Guide

38
Advancingerrors(thecountisincreasingontheDEBUGscreen)meantheHUBisnotnding
adevicethatwaspreviouslythere.Inorder,trythefollowing:
1. Checkthatthedevice’sDCbreakerisonandoperatingcorrectly,thatthedeviceitselfison,
andthattheCAT5cableconnectingthedevicetotheHUBispluggedinatbothends.en
re-pollthesystem(SETUPMATEPG2COMMREPOLL,seepage34)
2. ChecktheDEBUGscreentoconrmtheproblemissolved.
3. SwapHUBportswithanotherdevice,eachusingitsownCAT5cable.Re-pollthesystem
andcheckforerrorsoneachport.Iftheerrormoved,theproblemiswiththedeviceor
thecablebetweenthePortandthedevice.IftheerrorremainsonthesamePort,thenthe
problemiswiththeHUB.
4. TryconnectingtheMATEdirectlytothedevice.IftheMATErecognizesthedevice,the
problemcouldliewiththecableconnectingthedevicetotheHUBorwiththeHUBport
itself.Anunrecognizeddevicecoulditselfbedamaged.