Installation Guide

35
Press the <REPOLL> so key aer a device is
addedto,moved,orremovedfromtheHUB.
eMATEhasfoundtheHUBandwill
automatically go to the Port Assignment screen.
Aer displaying the devices connected to each
Port, the MATE returns to the choose category
screen on its own.
SETUP/MATE/COMM--------------
choose category:
BACK REPOLL PC DEBUG
Searching for Devices
HUB Found
Port Assignment
1> FX 2> FX 3> CC 4> CC
5> 6> 7> 8>
9> 10> 2M>
NOTE:DisconnectingtheMATE’sCAT5cableandthenreconnectingitalsoperformsthe
re-poll task, but the cable can be inconvenient to remove from a mounted MATE.
SETUP/MATE/COMM/PC----------
PC communications: OFF
BACK OFF ON
SETUP/MATE/COMM--------------
choose category:
BACK REPOLL PC DEBUG
enextcommunicationfunctiondealswiththe
MATE/personal computer interface. Press the
<PC>sokeytoenableordisabletheMATE’s
RS232communicationsport.
InthePCcommunicationsscreen,chooseON
orOFFbypressingtherespectivesokey.Press
the <BACK> so key to return to the choose
category screen.