Installation Guide

34
Press the <COMM> so key from the <PAGE 2> Setup choices screen for MATE
communications options:
• <REPOLL> forces the MATE to “rediscover” all the OutBack devices it is connected to. is
mustbeusedanytimeanOutBackdeviceismovedoraddedtoaHUB.
• <PC>willallowyoutoenableordisabletheMATE’sRS232communicationsport.is
setting must be enabled if you use any third party logging or control soware.
• <DEBUG>trackscommunicationerrorsinvolvingtheOutBackHUB.
Communications Options
FromtheSETUP/MATE/PAGE2screen,pressthe
<COMM> so key.
SETUP/MATE/PAGE2--------------
choose category:
PG1 SUMRY COMM MAIN
Why you want them:eMATEcommunicatescommandstodierentcomponents.Itneeds
tobeawareofanynewlyaddedormoveddevicessoitcanrecognizethem.Anerrorreading
doesn’tmeanthesystemisfailing,butthattheMATEislookingforacomponentthathasbeen
movedfromoneHUBPorttoanotherorhasbeendisconnectedcompletely.eMATEis
trying to account for the system components.
SETUP/MATE/PAGE2------------
choose category:
PG1 SUMRY COMM MAIN
SETUP/MATE/PAGE2----------------
choose category:
BACK REPOLL PC DEBUG
MAIN-----------------------------
9:57:32 A
SUM STATUS SETUP ADV
SETUP--------------------------
Choose product:
FX MATE
SETUP/MATE/PAGE1-----------
mate code rev: 4.1.3
choose category:
CLOCK CNT GLOW PG2
PATH