Installation Guide

32
PATH
MAIN-----------------------------------
9:57:32A
SUM STATUS SETUP ADV
SETUP-------------------------------
device:
SETUP/MATE/PAGE1-----------------
mate code rev: 402
choose category:
CLOCK CNT GLOW PG2
SETUP/MATE/PAGE2-----------------
choose category:
PG1 SUMRY COMM MAIN
PATH
MAIN--------------------------------
9:57:32A
SUM STATUS SETUP ADV
Pressing the <SUM>sokeyintheMAINmenu
bringsupyourchosenSUMMARYscreenor,if
Noneischosen,itwillbringuptheFXSUMMA-
RYscreenasadefault.Toadjustthetimingofthe
SUMMARYscreendisplay,seethenextsection.
SETUP/MATE/SUMMARY----------
summary control
BACK TYPE DELAY ROLL
SETUP/MATE/SUMMARY/TYPE--
sum screen 19 minutes
delay time
BACK INC DEC
IntheSETUP/MATE/SUMMARYscreen,press
the <DELAY> so key; this will take you to
the sum screen delay time screen. Pressing the
<ROLL> so key leads to the sum screen roll rate
screen.
e roll rate is how oen the MATE switches be-
tweentheFXandCCsummaryscreens.erate
can be adjusted with the <INC> and <DEC> so
keys. Pressing the <BACK> so key returns to the
SETUP/MATESUMMARYscreen.
SETUP/MATE/SUMMARY/TYPE--
sum screen 10 seconds
roll rate
BACK INC DEC
<DELAY>inSUMMARYmodeshows
howlongittakesforaSUMMARY
screen to be automatically displayed.
is time can be increased or decreased
by pressing the <INC> and <DEC> so
keys.AertheSUMMARYscreendelay
time is chosen, press the <BACK> so
keytoreturnyoutotheSETUP/MATE-
SUMMARYscreen.