Installation Guide

31
SETUP/MATE/SUM/TYPE----------
summary CC Only
screen type
BACK INC DEC
CC Only—displaystheCCSUMMARYscreen.
Pressing the <INC> opens the DC Only summary
screen.
Having chosen a Summary type—None, Roll, FX Only, CC Only, DC Only or DCSimple:
1. Aerexitingthatscreen,theSUMMARYscreenwillautomaticallyappearwheneverthe
MATE has been inactive for the <TIME>setpoint(verymuchlikeascreensaverona
computermonitor).
2. echosenSUMMARYtypewillalsobetheSUMMARYmanuallycalledupbypushing
the <SUM>sokeyontheMAINmenu.
3. IftheMATEisconnectedtoaHUBwithaChargeController,anFX,andaFLEXnetDC,
itwillswitchamongtheCC,FX,DCSUMMARY,andDCSimplescreensevery20seconds
whenin“Roll”mode.
4. Ifyouchoose“None,”theMATEcontinuestodisplaythelastactivescreenviewed;ifyou
press the <SUM>sokeyontheMAINmenuwhen“None”ischosen,theFXSUMMARY
screen appears.
SETUP/MATE/SUM/TYPE----------
summary DC Only
screen type
BACK INC DEC
SETUP/MATE/SUMMARY----------
summary control
BACK TYPE DELAY ROLL
DC Only—displaystheDCSUMMARYscreen.
Pressing the <INC> so key opent the DC Only
Simple screen.
FromtheDCOnlySimplescreen,pressthe
<BACK> so key to return to the summary con-
trol screen.
SETUP/MATE/SUM/TYPE---------
summary DCSimple
screen type
BACK INC DEC