Installation Guide

29
OutBack Charge Controller Summary Screen
e CC summary applies to all OutBack Charge
Controllers.Itsscreenshowsthevoltagelevelofthe
battery(alsonon-temperature-compensated)and
the amount of power being supplied to the battery.
is screen is the default Summary screen if the
ChargeControllerisdirectlyconnectedtotheHUB.
eAHvalueappliesonlytotheFLEXmax80and
FLEXmax60ChargeControllers.
CC TOTALS 13.3V
Output 0A 0.000kW
Today 0.0kWh
0 AH
FX Summary Screen
IftheMATEhasoneormoreFXsconnectedto
itanddoesnothaveaFLEXnetDCaspartofthe
system,anFXSummaryscreenwillbedisplayed
as the Summary default screen. Otherwise, it will
followtheFLEXnetDCsummaryscreens.
eFXsummaryscreen’svaluessummarize
powerowinanFXsystemaswellasthenon-
temperature compensated battery voltage.
FX Total 12.6V 97%
Inverting 0.000kW
AC Loads 0.000kW
Buying $ 0.000kW
Summary Screen Options
Why you might want them:SummaryscreensshowthecurrentstatusofoneormoreFXsor
ChargeControllers.Giventhateachuserandsystemisdierent,theMATEoersthechoiceof
viewing the status of either component as well as the timing of those displays.
SETUP-------------------------------
choose device:
FX MATE
MAIN------------------------------------
9:57:32A
SUM STATUS SETUP ADV
SETUP/MATE/PAGE1------------------
mate code rev: 402
choose category:
CLOCK CNT GLOW PG2
SETUP/MATE/PAGE2-----------------
choose category:
PG1 SUMRY COMM PG3
PATH
SETUP/MATE/PAGE2--------------
choose category:
PG1 SUMRY COM MAIN
SETUP/MATE/SUMMARY----------
summary control
BACK TYPE DELAY ROLL
Press the <SUMRY> so key from the <SETUP
MATE/PAGE2> Setup choices screen.
Pressing the <SUMRY> so key brings up the
SETUP/MATE/SUMMARY(summarycontrol)
screen options <TYPE> and <TIME>.