Installation Guide

18
• LOCATION—thetopline,STATUS/FX/METER-----P01(theHUB’srstPort)indicates
STATUSthenFXthenMETERhavebeenselectedfromtheMAINscreen.Pressingthe
<DOWN> or <UP>sokeysdisplaysthedierentMETERscreens.Pressingthe<PORT>
sokeyadvancesthePortnumberifthereareotherdevicesconnectedtotheHUB.Ifno
HUBispresent,thiswillread“P00”.
•LABEL—thescreen’slesideshowsacondition,systemfeature,ormeasurableevent.Ifthe
textformstoolongastatementacrossthescreen,thewordswillbestackedoneabovethe
othersuchas“outputvoltage”above.Whenmisread,it’sviewedas“output…122vac…
voltage”wheninfactthisscreenisstatingtheoutputvoltageis122VAC.
•VALUE SETTING—therightsideofthisscreenstatestheoutputvoltageat122VAC.Some
screens allow adjustment of this value setting when appropriate.
•SOFT KEYS—thebottomline,DOWNUPTOPPORT,arethesokeycommandswhich
facilitateeitherachangeofscreensintheMETERmenuusing<DOWN>, <UP> or
<TOP> sokeysorachangeofHUBportsusingthe<PORT> so key.
Inothercases,aMATEnavigationscreenleadstoascreenthatcanrequireauser’saction.
escreenbelow,forinstance,asksyoutochooseacategory—HBX,GRIDUSE,AGS,or
ADV.Oncechosen,youoenaregiventhechoicetochangeoralterpartofyoursystem’s
functioning, such as the voltage level the batteries must drop to before automatically
recharging or the times the generator runs.
On All Screens:
•Lowercaselettersnormallyshowaconditionorsystemitemthatcanbealteredor
otherwise adjusted.
•Uppercaselettersidentifyascreen’snameorindicateasteptofollowtoarriveatascreen
with these values.
ADV/MATE/PG1--------------------
choose category:
HBX GRIDUSE AGS PG2
Key to the Example Diagrams
So keys
Solid black indicates key can be pressed
Downarrowwillleadtothenextscreen
Uparrowpointstooneormorekeysthatwill
change a value
Pressing <DOWN>leadstothenextmenu
Pressing <UP> leads to the previous menu
DOWN
UP