Installation Guide

15
eMAINscreenappearsaertheMATEdetects
theHUB(andanydevicesconnectedtoit)or
detectsasingledeviceifaHUBisnotinuse.e
MAINscreenisalwaysthesamewiththeexcep-
tion of the time display. At the bottom of the
MAINscreenarethefoursokeycommands.
SUMMARYshowsthedirectionandamount
of power ow in regard to inverting, charging,
selling,and/orpassthrough.Italsoshowsthe
voltage of the battery. Please see the FX and VFX
Series Inverter/Charger Programming Manual for a
description of these functions.
eSTATUSscreenistherststepinviewing
the status of either the OutBack Charge Control-
lerorFXSeriesInverter/Chargerandanyoftheir
meters and conditions.
eSETUPscreenleadstoadditionalscreens
showing some common set points and parameters
ofeithertheMATEoranFXSeriesInverter/
Charger. ese screens allow adjustments to such
featuresastheMATE’sclockandbackground
lightingorwhetherthepowerinputtotheFXis
coming from a grid or a generator.
eADVANCEDscreenleadstoscreensforthe
FXSeriesInverter/Charger,theOutBackCharge
Controller, and the MATE itself that allow for
changingeachcomponent’sadvancedsettings.
MAIN Screen
<SUM>
<STATUS>
<SETUP>
<ADV>
MAIN---------------------------------
12:17:04P
SUM STATUS SETUP ADV
No Device Found
Would you like to Retry?
YES NO