Installation Manual and Specifications

Introduction
900-0123-01-01 Rev A 9
o
GSLCPV1-300VDC-230
— GS Load Center for PV and AC applications (single-phase). Factory-
prepared with one 175 Adc inverter circuit breaker, dual AC inputs, 230 Vac maintenance bypass
assembly, one PV array input, FLEXnet DC battery monitor, and two shunts. Intended as a “plug-
and-play” solution for systems with a single inverter, one FLEXmax 100 charge controller, and battery
monitoring.
 Intended for Radian model GS3548E and 300 Vdc charge controllers.
Figure 2 GS Load Center with Devices
The enclosure provides mounting holes for the HUB Communications Manager on the left.
On the right, the enclosure has mounting holes for brackets to mount up to two FLEXmax
charge controllers.
NOTE
:
OutBack FLEXmax 100 charge controllers do not mount directly to the GSLC and
do not require additional mounting brackets. They are mounted beside the inverter or the
GSLC. See the inverter
Installation Manual
for more information.