Installation Manual and Specifications

Installation
20 900-0123-01-01 Rev A
Figure 13 GSLC175-120/240 and GSLC175-230
– Additional Components
Remove Top Cover
Figure 14 Removing the Top Cover from the GSLC
The following components are sold
separately for the GSLC175-120/240
and GSLC175-230:
o
PV Ground Fault Detector-Interrupter (GFDI)
o
FLEXnet DC Battery Monitor (FN-DC);
see page 37
o
Additional DC shunts and GS-SBUS
o
PV Disconnect 80-amp circuit breaker
(PNL-80-DC)
To Remove the Top Cover:
1. Remove the four screws; one in each corner.
2. Lift the top off the enclosure.
Enclosure with Top
Removed