Manualshelf

Installation Manual and Specifications

ManualsBrandsOutback Power ManualsInverter AccessoryOutback Power GSLC Empty
11121314151617181920
900-0123-01-01 Rev A
19
Installation
Hardware Options
Different versions of the GSLC come with different components already installed.
o
GSLC
, the “basic” or “empty” version, requires almost all components to be installed if they are
needed. Instructions for this product begin on page 22.
o
GSLC175-120/240
and
GSLC175-230
are the “inverter only” versions for Radian models
GS8048, GS8048A, and GS7048E. They have hardware for Radian inverter AC and DC
connections. Battery monitoring or PV capability must be installed as needed. Installation for these
items begins with the DC shunts on page 26.
o
GSLC175-PV-120/240
,
GSLC175-PV-230
,
GSLC-PV-300VDC
, and
GSLC-PV-300VDC-
230
are the “fully-loaded” versions for Radian models GS8048, GS8048A, and GS7048E. They
have all options already present and need only external wiring and devices added. Users with these
versions can skip to the wiring section on page 33.
o
GSLC175PV1-120/240
,
GSLC175PV1-230
,
GSLC-PV1-300VDC
, and
GSLCPV1-
300VDC-230
are the “fully-loaded” versions for Radian models GS4048A and GS3548E. They
have all options already present and need only external wiring and devices added. Users with these
versions can skip to the wiring section on page 33.
Additional AC and DC circuit breakers are available for installation on all models.
The following pages describe the installation of individual items, including the removal of the
GSLC covers. Page 22 lists the hardware requirements for these items.
o
Instructions for Radian inverter mounting (along with other devices) begin on page 28.
o
Instructions for installing the FLEXnet DC battery monitor begin on page 37.
o
Instructions for installing the AC input-output bypass (IOB) assembly begin on page 47.
Figure 12 GSLC – Additional Components
The following components are sold separately for the GSLC:
o
Inverter Main Disconnects (required for inverter installations)
o
AC Maintenance Bypass Assembly
o
AC Terminal Bus Bars (TBB)
o
PV Ground Fault Detector-Interrupter (GFDI)
o
FLEXnet DC Battery Monitor (FN-DC); see page 37
o
Additional DC shunts and GS-SBUS
o
PV Disconnect 80-amp circuit breaker (PNL-80-DC)