Product Manual

900-0198-01-00 Rev A 35
Metering
MATE3 Screens
The MATE, MATE2, and MATE3 system displays can each monitor the FX inverter and other networked
OutBack devices. Menu navigation for the MATE3 is depicted in this chapter.
From the Home screen, the
<Inverter>
“soft” key accesses the screens for monitoring the inverter.
Figure 16 Home Screen
Inverter Screen
The Inverter soft key opens a screen showing the inverter operating mode, battery voltage, and status of
several AC operations. The
<Port>
soft key will select other networked OutBack inverters, if present. The
<Next>
soft key accesses the Battery screen.
Figure 17 Inverter Screens
Screen items:

The upper left corner is the Inverter Mode (see above). When
Charging
is indicated, the Charge Mode specifies
the stage.

Invert
displays the kilowatts and AC amperage generated by the inverter. It may go to loads, or in a
grid-interactive system it may be sold back to the utility grid.
Inverter Soft Key
Inverter Modes:

Inverting
(see page 13)

Searching
(see page 14)

Charging
(see Bulk on page 20)

Charger Off
(see pages 17 and 20)

Float
(see page 21)

EQ
(see page 23)

Silent
(see page 21)

PassThru
(see page 17)

Error
(see page 40)

Off
Charge ModeInverter Mode
Inverter Modes (slave):

Slave On

Slave Off

Error
Charge Modes:

BULK

FLOAT

EQ