Specifications

FLEXware 1000 Specifications

Model: FW1000-DC

DC enclosure which mounts at the DC side of three or four FX Series Inverter/Chargers. Supports up to

eight terminal bus bars (not including GBB) and up to three shunt assemblies depending on

configuration

Includes: Ground bus bar, 1000 Amp DC shunt assembly, positive bus, breaker mounting hardware,

enclosure mounting hardware, two FW-SBUSs and one FLEXware 1000 breaker bus

Unit Dimensions (H x W x D)

Shipping Dimensions (H x W x

Shipping

Weight

Enclosure Type

38.5 x 11.4 x 12.1" (97.8 x 29.0

x 30.7 cm)

14.5 x 13.6 x 40.6" (36.8 x 34.5 x

103.1 cm)

21 lbs. (9.5 kg)

Type-1 indoor

(IP30)

Model: FW1000-AC

AC enclosure which mounts at the AC side of three or four FX Series Inverter/Chargers. Supports eight

terminal bus bars and one FW-X240. The FW1000 system utilizes two FW-MPs (mounting plates) and

a set of the DCA and ACA conduit adapters for each inverter/charger. DC and AC breakers, Input-

Output-Bypass Assemblies and all other additional components sold separately.

Includes: Ground bus bar, two DIN mounting brackets and FLEXware 1000 wiring raceway