MATE3s Datasheet
ManualsBrandsOutback Power ManualsSolar & Wind PowerFLEXpower THREE 9 kW, 48 VDC solution, triple VFXR3048E, pre-wired AC and DC boxes with AC Bypass, 175 Amp DC breakers, PNL-GFDI-80Q and 80 Amp PV breaker, HUB 10.3, RTS, FLEXnet DC, surge protectors plus three FLEXmax 80 MPPT charge controllers, MATE3s a
OutBack Power reserves the right to make changes to the products and information contained in this document without notice.
Copyright © 2019 OutBack Power. All Rights Reserved. OutBack Power is a registered trademark of Alpha Technologies Services, Inc.
2
MATE3s Specifications 09/2019
www.outbackpower.com
#980-00081-01-001 REV A
Model:
MATE3s
Display
4.0 x 1.2in full graphical display
Quick System Access
5 system operation hot keys, 4 user programmable soft keys
Status Indicators
(9) LED indicators
Navigational Controls
5 navigational keys
Setpoint Adjustment
Touch sensitive scroll wheel
Communication Protocols
Proprietary OutBack communications protocol and SunSpec Modbus
Interconnect Cabling Included
Standard CAT5 network cable with RJ-45 modular jack - 6ft (2m) included
PC Computer Interface
HTML system status dashboard over local intranet connection
Field Update Capability
Yes (includes Radian Series inverter/chargers and FLEXmax Series charge controllers [rev 3.0 or higher])
Microprocessor
80MHz 32 bit processor
Set Point and Data Memory
8Mb RAM/ 64Mb of flash RAM
Clock/Calendar
On-board real time clock with battery backup
Operating Temperature Range
0 to 50°C
Mounting
Surface-mount (various brackets available)
Environmental Rating
Indoor Type 1 (IP 30)
Maximum Cable Length
300ft (100m)
Warranty
Standard 5 year warranty
Weight (lb/kg)
Unit: 1.4 / 0.64 Shipping: 3.0 / 1.36
Dimensions H × W × D (in/cm)
Unit: 7.1 × 7.5 × 1.6 / 18 × 19 × 4.1 Shipping: 3.25 × 9 × 13.5 / 8.26 × 22.9 × 34.3