FLEXpower THREE FXR Datasheet

ManualsBrandsOutback Power ManualsSolar & Wind PowerFLEXpower THREE 9 kW, 48 VDC solution, triple VFXR3048E, pre-wired AC and DC boxes with AC Bypass, 175 Amp DC breakers, PNL-GFDI-80Q and 80 Amp PV breaker, HUB 10.3, RTS, FLEXnet DC, surge protectors plus three FLEXmax 80 MPPT charge controllers, MATE3s a

OutBack reserves the right to make changes to the products and information contained in this document without notice.

Power Flow

Grid

Generator

Main Panel

Sub PanelLoad

PV Source

Energy Storage

FLEXpower THREE FXR

Fully Pre-Wired Triple Inverter System

Features:

• Factory tested, pre-wired and pre-conﬁgured

systems

• Fast installation—just hang on the wall with the

bracket (included) and make connections

• Sealed models available for operating in harsh

environments

• Available in seven models for 120VAC or

208VAC applications

• 300VDC models provide up to 99% peak

eciency with FLEXmax 100 charge controller

• Seven dierent programmable operational

modes, with generator assist

• Advanced Battery Charging (ABC) supports a

wide range of battery technologies including

lithium-ion

• GridZero operating mode minimizes grid

dependence in areas where incentives are

changing and utility sell-back is limited

• Sinewave output in 12V, 24V or 48V versions

with a typical operating eciency up to 93%,

ﬁeld selectable 50Hz/60Hz

The most advanced Grid/Hybrid inverter features are now

available on the industry’s most trusted and proven systems

platform, for unmatched ﬂexibility and value. The FLEXpower

THREE FXR is available in two models for 120/208VAC

applications ranging from 9kW to 10.8kW and are ﬁeld selectable

for 50Hz or 60Hz. Each system is ﬁeld upgradable to eliminate

downtime during critical updates, features seven programmable

operating modes including GridZero and Advanced Battery

Charging and oers remote monitoring and control through any

internet enabled device with OPTICS RE.

The FLEXpower THREE is ideal for three-phase power needs

such as larger residential, farms and agricultural installations,

light commercial applications including small businesses,

stores and restaurants, and remote facilities, with all necessary

components integrated into a compact hang-on-the-wall system

with a minimal footprint.

OutBack’s pre-assembled and pre-wired FLEXpower systems are now equipped with the

updated FXR Series Grid/Hybrid inverter/chargers.

Typical System Integration

Summary of content (2 pages)

PAGE 1
FLEXpower THREE FXR Fully Pre-Wired Triple Inverter System Features: • Factory tested, pre-wired and pre-configured systems • Fast installation—just hang on the wall with the bracket (included) and make connections • Sealed models available for operating in harsh environments • Available in seven models for 120VAC or 208VAC applications Typical System Integration Power Flow PV Source • GridZero operating mode minimizes grid dependence in areas where incentives are changing and utility sell-back is limited
PAGE 2
FLEXpower THREE FXR Specifications 05/2019 FLEXpower THREE FXR 300VDC FLEXpower THREE FXR 46.0 x 58.425 x 13.0 / 116.84 x 148.40 x 33.02 46.0 x 58.425 x 13.0 / 116.84 x 148.40 x 33.02 433 / 196 433 / 196 53 x 48 x 34 / 134.6x 121.9 x 86.4 53 x 48 x 34 / 134.6x 121.9 x 86.4 Shipping Weight (lb/kg) 577 / 261.7 565 / 256.3 For North America Description Inverter(s) FP3 FXR3048A-300 Triple FXR3048A, 9.0kW FLEXpower THREE 300VDC FXR3048A (3x) FP3 FXR3048A-01 Triple FXR3048A, 9.