FLEXpower ONE FXR Datasheet

OutBack reserves the right to make changes to the products and information contained in this document without notice.

Features:

• Available in six models for 120VAC or 230VAC

applications, in sealed or vented units with

die-cast aluminum chassis

• Seven dierent programmable operational

modes, with generator assist

• Advanced Battery Charging (ABC)

programmability

• GridZero operating mode minimizes grid

dependence in areas where incentives are

changing and utility sell-back is limited

• Sinewave output in 12V, 24V or 48V versions

with a typical operating eciency up to 93%,

ﬁeld selectable 50Hz/60Hz

• Sealed models available for operating in harsh

environments

• Factory tested, pre-wired and pre-conﬁgured

The FLEXpower ONE FXR is available in six models for

120VAC or 230VAC applications ranging from 2500W to

3600W and are ﬁeld selectable for 50Hz or 60Hz. Each

system is ﬁeld upgradeable to eliminate downtime during

critical updates, features seven programmable operating

modes, including GridZero and Advanced Battery Charging,

and oers remote monitoring and control through any

Internet connected device via OPTICS RE.

The FLEXpower ONE is ideal for residential and commercial

applications including cabins, vacation homes, farm

buildings, remote communications sites and back-up power

systems, with all necessary components integrated into a

compact hang-on-the-wall system with a minimal footprint.

OutBack’s pre-assembled and pre-wired FLEXpower systems are designed for easy installation

and reliable operation.

Power Flow

Grid

Generator

Main Panel

Sub PanelLoad

PV Source

Energy Storage

Typical System Integration

FLEXpower ONE FXR

Fully Pre-wired Single Inverter System

PAGE 1
FLEXpower ONE FXR Fully Pre-wired Single Inverter System Features: • Available in six models for 120VAC or 230VAC applications, in sealed or vented units with die-cast aluminum chassis • Seven different programmable operational modes, with generator assist • Advanced Battery Charging (ABC) programmability Typical System Integration Power Flow • Sinewave output in 12V, 24V or 48V versions with a typical operating efficiency up to 93%, field selectable 50Hz/60Hz PV Source • Sealed models available for op
PAGE 2
FLEXmax ONE FXR Specifications Details FLEXpower ONE FXR Finished Dimensions H x W x D (in/cm) 33.5 x 19.25 x 13.0 / 85 x 50 x 33 Weight (lb/kg) Shipping Dimensions H x W x D (in/cm) Shipping Weight (lb/kg) 04/2019 98 / 44.5 36 x 23 x 18 / 91.44 x 58.42 x 45.72 113 / 51.26 *FLEXpower ONE FXR systems include a mounting bracket, FXR/VFXR inverter/charger, FLEXmax charge controller, MATE3, HUB10.