Manualshelf

FLEXmax 60/80 Datasheet

ManualsBrandsOutback Power ManualsSolar & Wind PowerFLEXpower One 3.0 kW, 24 VDC solution, single VFXR3024E, prewired AC and DC boxes with 230VAC Bypass, 250 Amp DC breaker, GFDI, 80 Amp PV breaker, Mate3s, HUB 10.3, RTS, FLEXmax 80, FLEXnet DC and surge protector
12
1
OutBack reserves the right to make changes to the products and information contained in this document without notice.
Copyright © 2017 OutBack Power. All Rights Reserved. OutBack is a registered trademark of The Alpha Group.
MANAGE THE SYSTEM
• OPTICS RE System Monitoring and Control
• MATE3 System Display and Communications
STORE THE ENERGY
• EnergyCell RE, GH, NC and OPzV Batteries
• Battery Enclosures and Racking
MAKE THE POWER
• FLEXpower Integrated Systems
• Inverter/Chargers & Charge Controllers
OUTBACK POWER—MASTERS OF THE OFF-GRID. FIRST CHOICE FOR THE NEW GRID.
FLEXmax 60/80
CONTINUOUS MPPT CHARGE CONTROLLERS
Three Reasons to Choose the FLEXmax 60/80
Charge Controllers from OutBack Power:
1. DESIGNED FOR PERFORMANCE
• The de facto standard in the industry, from the originators of
the multiple voltage MPPT charge controller and the rst choice
for system design professionals
• Innovative FLEXmax MPPT software algorithm is both continuous
and active; increases PV array output by up to 30%
• Lower PV array voltage means maximum resistance from shading
versus higher voltage controllers
• Full power output in ambient temperature up to 104°F (40°C)
• Battery voltages from 12 to 60VDC
• Greater than 98% peak eciency; less than 1W self-consumption
2. ENGINEERED FOR RELIABILITY
• Extensive quality and reliability testing, including Highly
Accelerated Life Testing (HALT)
• 15 years of experience manufacturing products for fault
intolerant, mission-critical applications
• Standard 5 year warranty (extended 10 year warranty available)
3. EASYTOINSTALL, MONITOR AND CONTROL
• System configures quickly with smart programming wizards
(MATE3 required)
• Built in 4 line 80-character display for easy programming with no
other equipment required
• Monitor, command and control from any internet-connected
device with OPTICS RE
• Fully OutBack network integrated and programmable
• Programmable auxiliary control output for smart load controls
• Built-in 128 days of data logging
• Global technical support
Generator
Sub Panel
Load
Energy Storage
Power Flow
Grid
Main Panel FLEXpower Radian
PV Source
OutBack FLEXmax 60/80 Typical System
Integration (w/ FLEXpower Radian):
FLEXmax 80FLEXmax 60

Summary of content (2 pages)