Outback FM80 User Manual

Operation
18 900-0009-01-00 Rev D
Version and/or Voltage Setting Screens
Once the password has been entered, the display will return to the Select Version screen.
Figure 10 Changing the Version Setting
To change the version:
1. Press <NEXT> or <SEL> to cycle through the version choices
of:

English
,

Australian
, or

Espanola
.
2. When the desired version is displayed, press <ENTER> or
<ENTRA> to proceed to the confirmation screen.
3. Press <YES> to confirm the selection.
The SYSTEM VOLTAGE screen appears next.
The FLEXmax automatically detects the system’s battery voltage and
indicates it by placing two ^^ symbols below the value.
o If the value indicated is correct, press <ENTER>.
o If the value indicate is not correct for the present system,
press <> to move the ^^ to below the correct voltage.
o Press <YES> to confirm the selection.
The Status screen is the last screen to be displayed after startup.
The soft keys below the Status screen navigate to the main menu and
the End-of-Day summary screen. See page 19 for details on the
Status screen.
Select Version
Elija la Version
English
NEXT ENTER ENTRA SEL
Select Version
SYSTEM VOLTAGE
12 24 36 48 60
^^
 ENTER
SYSTEM VOLTAGE Screen
Are you sure?
English
NO YES
Confirmation Screen
Select Version
Elija la Version
English
NEXT ENTER ENTRA SEL
Select Version
or
In 11.6V 0.0 A
Out 13.8V 0.0 A
0.000 kW 0.0 kWH
AUX: OFF Sleeping
Status Screen
Are you sure?
12 24 36 48 60
^^
NO YES
Verification Screen
or