Outback FireRaptor Module Level Application Note

Application Note
©2019OutBackPower,Arlington,WA98223RB‐GE‐4/10/19Page4of11  
ICS Plus
Here is an example of how to wire the FireRaptor FRS-01 with the ICS Plus system. This example uses
J3 to control the power going to the FRS-01. When the RSI is turned OFF, J3 opens and removes
power to the FRS-01. Note that this power is a 24-volt source that is not the BKR-CTRL-DC.
Figure 4 Example configuration with ICS Plus and the FRS-01
