OutBackPower FXR Renewable Series 230V E Model Operator’s Manual

900-0169-01-00 Rev B 51
Metering
MATE3 Screens
The MATE3 system display can monitor the FXR inverter and other networked OutBack devices. From
the Home screen, the
<Inverter>
“soft” key accesses the screens for monitoring the inverter.
Figure 16 Home Screen
Inverter Screen
The Inverter soft key opens a screen showing the inverter operating mode, battery voltage, and status
of several AC operations. The
<Port>
soft key will select other networked OutBack inverters, if
present. The
<Next>
soft key accesses the Battery screen.
Figure 17 Inverter Screens
Screen items:

The upper left corner is the Inverter Mode (see above). When
Charging
is indicated, the Charge Mode
specifies the stage.

Invert
displays the kilowatts and AC amperage generated by the inverter. It may go to loads, or in a
grid-interactive system it may be sold back to the utility grid.

Charge
displays the kilowatts and AC amperage consumed for the inverter to charge the battery bank. This
line also shows the present charging stage.
Inverter Soft Key
Inverter Modes (master or
subphase master):

Inverting
(see page 23)

Searching
(see page 24)

Support
(see page 14)

Sell
(see page 15)

Charging
(see Bulk on page 31)

Charger Off
(see pages 28 and 31)

Float
(see page 32)

EQ
(see page 36)

Silent
(see page 32)

PassThru
(see page 28)

Error
(see page 58)

Off
Charge ModeInverter Mode
Inverter Modes (slave):

Slave On

Slave Off

Error
Charge Modes:

BULK

FLOAT

EQ