Outback Power FX and VFX Series Programming Manual

27
Once the MATE recognizes each FX (and Charge Controller or CC), push and hold the  rst two soft keys
simultaneously to return to the MAIN menu. To program the FXs, go to the ADV/FX/STACK menu on
the MATE navigating with the following steps:
Press
.
NOTE: Pressing and holding the  rst two soft keys
at the same time will always bring up the Main
Menu screen.
Push any soft k ey on the AD V/SETTINGS/WARNING
screen and go to the ADV/PASSWORD screen.
MAIN--------------------------
12:12:16A
SUM STATUS SETUP ADV
ADV/SETTINGS/WARNING
changes made could adversely a ect
system performance
PROGRAMMING THE FXs
The screen displays 132. Press until it
scrolls to the password 141.
ADV/PASSWORD----------------
enter the password
132
ENTER INC DEC EXIT
ADV/PASSWORD----------------
enter the password
141
ENTER INC DEC EXIT
Push .
ADV
INC
ENTER