Outback Power FX and VFX Series Programming Manual

GENERATOR MENU

OutBack o -grid and mobile FX Inverter/Chargers are programmed to use an AC generator as their

default source of AC input. The CHARGER GEN screens allow a user to adjust the input voltage window

and time delays of thei AC input.

From the ADVANCED screen, press .

Press

Press to adjust the AC input set points

and operation.

The gen input connect delay is the time period be-

tween the FX’s recognizing an acceptable genera-

tor source of AC and connecting that source to

AC loads. This delay allows the generator to warm

up and has a range between 0.2 minutes and 15

minutes which are adjusted with and

Press to view the next GEN screen.

ADV

choose device:

FX CC DC MATE

ADV/FX/PAGE 1-----------------

choose category:

ADV INV CHGR PG2

ADV/FX/PAGE 2-----------------

choose category:

PG1 GRID GEN PG3

ADV/FX/GEN---------------P00

gen input 0.5 min

connect delay

DOWN INC DEC PORT

PG2

GEN

DEC

INC

DOWN