Outback Power FX and VFX Series Programming Manual

ADV

choose device:

FX CC DC MATE

ADV/FX/PAGE 1-----------------

choose category:

ADV INV CHGR PG2

ADV/FX/CHARGER---------P00

charger 18.0 aac

limit

DOWN INC DEC PORT

ADV/FX/CHARGER---------P00

absorb 14.4 vdc

setpoint

DOWN INC DEC PORT

CHARGER MENU

Each battery manufacturer has speci c recharging directions and guidelines. OutBack’s default values

work for many batteries, but might not be the ideal settings. The CHARGER Menu allows these settings

to be adjusted. to the manufacturer’s recommendations.

From the ADVANCED menu, press .

Press .

The charger limit is the maximum AC current the

FX uses to charge the batteries. Depending on

the FX model, the setting range is as low as

0.0 AAC to between 12.0AAC and 20.0AAC

using and Press to

continue in the CHARGER Menu.

The absorb set point is the  rst stage (BULK)

recharging voltage for the batteries. This set point

ranges from 13.0VDC to 16.0VDC as determined

using and . Press to view

the absorb time limit screen.

CHGR

INC

DEC

DOWN

INC

DEC

DOWN