OutBack Power MATE Series Overview

MATE
(continued)
900-0131-01-00 Rev A.vsd\MATE ADV Setup\2012-03-21
©2012 OutBack Power Technologies. All Rights Reserved.
Page 3
Accessing the Advanced Menu:
ADV--------------------
choose device
FX CC DC MATE
Changing more detailed operating
parameters requires access to the
Advanced Setup Menu.
ADV/MATE/HBX------------
hbx-use 24.0 Vdc
grid set point
DOWN ADV INC DEC
ADV/MATE/HBX------------
hbx-use 1.0 hrs
grid delay
DOWN UP INC DEC
ADV/MATE/HBX------------
hbx-drop 26.0 Vdc
grid set point
DOWN UP INC DEC
ADV/MATE/HBX------------
hbx-drop 1.0 hrs
grid delay
DOWN UP INC DEC
ADV/MATE/HBX------------
ac input USE
control
DOWN UP CHANGE
ADV/MATE/HBX
end of hbx menu
UP TOP ADV
ADV/MATE/GRIDUSE--------
griduse enable: OFF
DOWN ADV OFF ON
ADV/MATE/GRIDUSE
end of griduse menu
UP TOP ADV
ADV/MATE/HBX------------
ac input USE
control
DROP USE HBX DONE
ADV/MATE/PAGE1
choose category
HBX GRIDUSE AGS PG2
ADV/MATE/PAGE3------------
advanced charger
float control
PG2 CC FN-DC PG4
ADV/MATE/PG3/CC-----------
enable CC float
coordination: Yes
PG3 YES NO ADV
ADV/MATE/PG3/FN-DC--------
enable FN-DC charge
termination: Yes
PG3 YES NO ADV
ADV/MATE/PAGE2----------
choose category:
PG1 DEFAULTS PG3
ADV/MATE/DEFAULT----------
reset MATE to
factory default
RESET NO
Page 1 Page 2
Page 3
Page 4
MAIN--------------------
3:02:14P
SUM STATUS SETUP ADV
Charge Controller and
FLEXnet DC Menus
Resetting the MATE2 to
Factory Defaults
1
1
The AGS Menu is shown
on the next page….
ADV/MATE/DEFAULT----------
Are you sure?
YES NO
ADV/MATE/GRIDUSE--------
weekday 12:00A
griduse start time
DOWN UP CHANGE
ADV/MATE/GRIDUSE--------
weekday 12:00A
griduse stop time
DOWN UP CHANGE
ADV/MATE/GRIDUSE--------
weekend 12:00A
griduse start time
DOWN UP CHANGE
ADV/MATE/GRIDUSE--------
weekend 12:00A
griduse stop time
DOWN UP CHANGE
WEEKDAY GRIDUSE START
adj hour 12:00A
DOWN INC DEC
WEEKDAY GRIDUSE START
adj min 12:00A
INC DEC DONE
WEEKDAY GRIDUSE STOP
adj hour 12:00A
DOWN INC DEC
WEEKDAY GRIDUSE STOP
adj min 12:00A
INC DEC DONE
WEEKEND GRIDUSE START
adj hour 12:00A
DOWN INC DEC
WEEKEND GRIDUSE START
adj min 12:00A
INC DEC DONE
WEEKEND GRIDUSE STOP
adj hour 12:00A
DOWN INC DEC
WEEKEND GRIDUSE STOP
adj min 12:00A
INC DEC DONE
ADV/MATE/PG4-------------
FN-DC advanced grid
tie authority
PG3 MODE ADV MAIN
ADV/MATE/AGS/PG4/MODE--
FN-DC enable
disabled
PG4 IN DEC ADV
MAIN--------------------
3:02:14P
SUM STATUS SETUP ADV
ADV/SETTINGS/WARNING
changes made could
adversely affect
system performance
ADV/PASSOWRD------------
Enter the password
132
ENTER INC DEC EXIT
ADV/PASSOWRD------------
Enter the password
141
ENTER INC DEC EXIT
A
1. Press the <INC> soft key
until “141” is displayed on
the LCD.
2. Press the <ENTER> soft key
to accept the password and
move forward to the Device
Selection Menu.
A
B
B
MAIN-------------------
3:02:14P
SUM STATUS SETUP ADV
To return to the Main
screen at any time:
Press and hold the 2 left soft keys at the same
time. Release when the Main screen appears.