OutBack Power Installation and User Manual

28
Summary Screen Overview
e Summary screens provided by the MATE:
• SummarizethecurrentstatusofanyFX,OutBackChargeControllerand/orFLEXnetDC
connected to it.
• Canbeaccessedfromthe <MAIN> screen by pressing the <SUM> so key and can be set
topopuplikeascreensaveraeradelay(SeeSummaryScreenOptionsonthenextpage
formoresetupinformation).
Any MATE so key pressed while the Summary screen is being displayed returns you to the
screen that was active before the Summary screen was displayed. Pressing the two lower le
sokeysatthesametimeopenstheMAINMenuscreen.
MAIN--------------------------------
12:00:30P
SUM STATUS SETUP ADV
IftheMATEhasaFLEXnetDCconnectedtoit,
aninitialFLEXnetDCscreenwillbedisplayed
as the Summary default screen.
Pressingthesecondsokeybringsupthenext
threeFLEXnetDCsummaryscreensaswellas
theFXandChargeControllersummaryscreens.
E F
Battery Discharging
State of Charge 100%
DC Now 25.4V 100%
In 0.1A 0.000 kW
Out 0.4A 0.010kW
Bat -0.3A 0.010kW
DC TODAY minSOC 97%
In 102AH 2.70 kWH
Out 93AH 2.44kWH
Bat 9AH 0.26kWH
DC BAT 25.4V 100%
Bat -0.3A -0.010kW
Net 0AH 0.00kWH
Days Since Full 1.1
eFLEXnetDCsummaryscreensdisplay
thebatterystateofcharge,includingtheday’s
minimum, the current DC voltage, and the in
and out kilowatt hours and amp hours. All the
FLEXnetDCsummaryscreensareexplainedin
the FLEXnet DC User’s Guide which comes with
that component.