Installation Manual Owner manual

AC AND DC GROUNDING REQUIREMENTS

• Connectonlytoagrounded,permanentwiringsystem.Ensurethereisonlyoneneutral-ground

connection in the system at any time. Some codes require this connection be made at the main

panel only.

• Somegeneratorshavetheirownneutral-groundconnection.Ifageneratorisused,itsneutral-

ground connection will need to be disengaged for proper system operation.

• Forallinstallations,thenegativebatteryconductorshouldbebondedtothegroundingsystemat

one (and only one) point in the system.

• OutBackproductsarenotdesignedforuseinapositivegroundedsystem.PleasecontactOutBack

Technical Support for further information.

The equipment ground on each is marked with this symbol:

Box lug for grounding the FX chassis