Owner's manual

AUXILIARY AUX FUNCTIONS

The AUX output provides a 12 VDC, 0.7 ADC max output at the AUX terminals to control DC loads, or

AC external loads, if a DC-controlled relay is used. Typical loads include sending a fault alarm signal or

running a small fan to cool the FX.

ADV/SETTINGS/WARNING

changes made could

adversely aect

system performance

MAIN--------------------------

12:12:16A

SUM STATUS SETUP ADV

• Press the <ADV> soft key.

NOTE: Pressing and holding the rst two soft keys at the

same time will always bring up the Main Menu screen.

• Push any soft key on the ADV/SETTINGS/WARNING

screen and go to the ADV/PASSWORD screen.