TM FW-IOB-S-230VAC Input/Output/Bypass Assembly Installation Instructions
The OutBack Power Systems FW-IOB-S-230VAC allows manual switching between the FX Series Inverter/Charger and a second AC source, facilitating maintenance and power continuity. About OutBack Power Systems OutBack Power Systems is a leader in advanced energy conversion technology. Our products include true sine wave inverter/chargers, a maximum power point charge controller, system communication components, as well as breaker panels, breakers, accessories, and assembled systems.
Requirements and Warnings The OutBack FW-IOB-S-230VAC is intended as a system component and is included in a listing by ETL as indoor enclosures to UL standard UL 508A Industrial Control Panels. This enclosure is intended for battery circuits configured for 12 to 48 volts nominal. Grounding Instructions – Each enclosure should be connected to a grounded, permanent wiring system.
FW-IOB-S-230VAC Parts List AC Circuit Breakers AC Breaker Bypass Slide Plate Hot Conductors (Brown) Ground Conductor (Green) Neutral Conductor (Blue) Figure 1: FW-IOB-S-230VAC Hardware Kit Hot Conductors (Brown)
Figure 2: Placement of Bus Bars
Installing FW-IOB-S-230VAC Bypasss Breaker (installed upside down) Output Breaker Input Breaker Installing AC Breakers in FLEXware 250: • Remove the appropriate AC breaker knockouts from the AC side of chassis. • Insert breakers into openings and secure with fasteners provided in the FW250 Figure 3: AC Breaker Installation Hardware Kit.
Installing the FW250 AC Bypass Slide Plate Parts: 1. 8-32 X .75 Machine Screws (2) 2. 8-32 Nylock Nuts (4) 3. Nylon Washers (4) 4. FW250 AC Bypass Slide Plate (1) To Assemble: 1. A partial view of the FLEXware 250 chassis is shown for slide plate assembly clarity. 2. Remove the necessary circuit breaker knockouts first. Figure 4: FW250 AC Bypass Plate Installation 3. Install the AC Bypass Slide Plate as shown in the illustration. Do not over tighten the Nylock nuts.
19009 62nd Avenue NE Arlington, WA USA (+1) 360-435-6030 European Sales Office Barcelona, España (+34) 600-843-845 www.outbackpower.
