Assembly - Installation Instructions Instruction Manual

ManualsBrandsOutback Power Systems ManualsPower suppliersFW-IOB-S-120VAC Input/Output/Bypass

1

2

3

4

5

6

7

Installing the FW250 AC Bypass Slide Plate

Figure 4: FW250 AC Bypass Plate Installation

Parts:

1. 8-32 X .75 Machine Screws (2)

2. 8-32 Nylock Nuts (4)

3. Nylon Washers (4)

4. FW250 AC Bypass Slide Plate (1)

To Assemble:

1. A partial view of the FLEXware 250 chassis is

shown for slide plate assembly clarity.

2. Remove the necessary circuit breaker

knockouts rst.

3. Install the AC Bypass Slide Plate as shown in

the illustration. Do not over tighten the

Nylock nuts. Overtightening can cause the

AC Bypass Breaker Slide Plate to bind.