OutBack Power MATE3s Specifications Sheet

2
OutBack reserves the right to make changes to the products and information contained in this document without notice.
Copyright © 2017 OutBack Power. All Rights Reserved. OutBack is a registered trademark of The Alpha Group.
MATE3s SPECIFICATIONS 05/2017
Model:
MATE3s
Display
4.0 x 1.2” full graphical display
Quick System Access
5 system operation hot keys, 4 user programmable soft keys
Status Indicators
(9) LED indicators
Navigational Controls
5 navigational keys
Setpoint Adjustment
Touch sensitive scroll wheel
Communication Protocols
Proprietary OutBack communications protocol and SunSpec Modbus
Interconnect Cabling Included
Standard CAT5 network cable with RJ-45 modular jack - 6’ (2m) included
PC Computer Interface
HTML system status dashboard over local intranet connection
Field Update Capability
Yes (includes Radian Series inverter/chargers and FLEXmax Series charge controllers [rev 3.0 or higher])
Microprocessor
80MHz 32 bit processor
Set Point and Data Memory
8Mb RAM/ 64Mb of ash RAM
Clock/Calendar
On-board real time clock with battery backup
Operating Temperature Range
0 to 50°C
Mounting
Surface-mount (various brackets available)
Environmental Rating
Indoor Type 1 (IP 30)
Maximum Cable Length
300’ (100m)
Warranty
Standard 5 year Warranty
Weight (lb/kg)
Unit: 1.4 / 0.64
Shipping: 3.0 / 1.36
Dimensions H x W x D (in/cm)
Unit: 7.1 x 7.5 x 1.6 / 18 x 19 x 4.1
Shipping: 3.25 x 9 x 13.5 / 8.26 x 22.9 x 34.3
Optimize with OPTICS RE
It’s a powerful advantage…the ability to see the electricity you produce and consume. To monitor and control your renewable energy system with the touch of a button from any internet connected device—anywhere in
the world. Real-time status and hands-on control of your power ow and energy storage. Track individual system performance or manage a network of dispersed systems.