Installation Manual Owner's manual
Operation
Selecting the AC Source and AC Input Limit on the Inverter
IMPORTANT:
The A
C
Input
limit should NOT exceed the rating
of the overcurrent protection for the device.
DEC: Pr
essing this soft key decreases the value.
INC: Pressing this soft key increases the value.
AC2 GEN Menu:
Adjusts the maximum current the inverter will
draw from the generator for either supporting
loads or battery charging (between 2.0 Aac and
60.0 Aac).
AC1 GRID Menu:
Adjusts the maximum current the inverter will
draw from the grid for either supporting loads or
battery charging (between 5.0 Aac and 60.0 Aac).
The <Po
rt> So
ft Key switches between
ports on the HUB (i.e., between multiple
inverters if installed).
Figure 29 Inverter Setup Screen – Selecting AC Source
42 900-0095-01-00 Rev A