Owners Manual Owner manual

Applications
76 900-0150-01-00 Rev A
Figure 65 Adjusting Range Limits for Hydroelectric or Fuel-cell Applications
MPPT Menu
To adjust the range limits:
1. In the MATE3, navigate to the MPPT menu. (See page 35.
See page 37 for more information about the items on
this page. )
2. Select the MPPT Mode menu item. Set it to U-Pick.
3. Select the U-Pick VOC menu item. Set it to a percentage
value that is appropriate to the charging source.
4. Select the MPP Range Minimum menu item. Set it to Full.