Owners Manual Owner manual

MATE/MATE2 Screens
900-0150-01-00 Rev A 59
AUX Menu
Figure 60 ADV Menu for the AUX Features
Navigation for ADV/CC/AUX

<DOWN>
moves to the next menu item in
the diagram.

<INC>
increases the value of the selection.

<DEC>
decreases the value of the selection.

<PORT>
directs the MATE to read the next
device (port) on the HUB.

<TOP>
returns to the
CC/PAGE2
screen.

<ADV>
returns to the
choose device
screen.

<MAIN>
exits the Advanced menus and
returns to the main menu (see page 55).
CC/AUX
The AUX screens adjust the same settings that
are available on the Auxiliary Output screen in
the MATE3 (see page 39).
AUX mode:

vent fan

pv trigger

error output

night light

float

diversion: relay

diversion: solid st

low batt(ery) disconnect

remote
The
remote
mode also can be used for the
MATE’s AGS function.
NOTE
: The MATE must have firmware revision
4.1.6 or higher for AGS to work.
aux control

ON

OFF