User Manual

Warm water
Mild liquid dishwashing soap
Spray bottle with clean water
Spray bottle with mild soapy water
99% Isopropyl alcohol
Warning:
Avoid getting water into the power connector.
Avoid using hard water when cleaning the sensor.
Do not use acetone to clean the window. It will embrittle the polycarbonate.
Do not wipe dirt directly from the sensor. Spray it off with warm water first.
Procedure:
Using the 99% isopropyl alcohol and a clean microfiber towel, wipe away bugs/mud/debris from
the sensor.
Spray the sensor with warm, mild-soapy water and gently wipe the sensor with a clean microfiber
towel. Wipe along the curve of the sensor, not top-to-bottom (think moving with the grain).
Spray the sensor with clean water to rinse off the soap and dry with a second microfiber towel.
Enjoy your clean window.
2 Sensor
2.1 Overview
The OS2 offers an industry-leading combination of price, performance, reliability, size, weight, and
power. It is designed for indoor/outdoor all-weather environments and a long operating lifetime.
The OS2 family of sensors consist of three models, the OS2-128, OS2-64, and OS2-32, with differing
vertical resolution, but identical mechanical dimensions.
For the purposes of this document, the term “OS2” refers to the family of sensors, and only where
there is a difference in performance will each model be referred to by its specific model designation.
The contents of this manual are applicable only to Rev 06 sensors. Please contact
[e-mail]
with the sensor serial number to find out your sensor Rev information. For all other sensor hardware
revisions, please refer to the respective hardware user manual found here
Here.
8