User Manual

Table8.2: MULTIPURPOSE_IO - INPUT Interface Requirements
Parameter Min Voltage Max Voltage Min Driver Current
LOGIC LOW -30 V 2 V N/A
LOGIC HIGH 2.9 V 30 V 3mA @3.3V~5V, 5mA
at 24V and higher
8.3 Configuring the Ouster Sensor
Please refer to the GPS configuration section in the software user manual to configure your sensor to
synchronize its timestamp with the GPS.
9 Support
In case of any questions regarding the contents of this user manual or the configuration of the sensor,
please reach out to
[e-mail] or visit Ouster website.
29