User Manual

Selecting a Power Supply Cord/Cordset

If purchasing a power supply locally, it should be supplied with an appropriate power supply cord or

cordset for use with the power supply. If it’s necessary to select a power supply cordset for the Ouster

supplied power supply, it should be safety certified by a test house acceptable to the local region of

use, supplied with an IEC 60320, Type C6 cord connector to mate with the power supply and a plug

for connection to an AC outlet with an earthing contact/pin.

Environmental Ratings

All Interface Boxes are suitable for use indoors only in clean, protected environments at temperatures

between -20 °C and +50 °C. Interface Boxes are not designed for use outdoors or in environments

that are not protected from dust, moisture, or high humidity.

Mounting

The interface box may be mounted on a table top or on a wall (or similar vertical surface) not higher

than 2 m above the floor. Use not less than two (2) screws (M4 SHCS 10mm or longer are recom-

mended) to secure the interface box to the mounting surface.

Figure7.7: Mounting Guidelines -Ibox

For additional OS2 sensor CAD files refer to

Lidar Product Details page.