Datasheet

21
OUNEVA OY PRODUCT CATALOG 2018
Universal connectors
OTL 1000 V
Five reasons to choose OTL 1000 V
Criteria Conditions 94V-0 94V-1 94V-2
Total aming combustion for each specimen ≤ 10 sec ≤ 30 sec ≤ 30 sec
Total aming combustion for all 5 specimens of any set ≤ 50 sec ≤ 250 sec ≤ 250 sec
Flaming and glowing combustion for each specimen after second burner ame application ≤ 30 sec ≤ 60 sec ≤ 60 sec
Cotton ignited by aming drips from any specimen No No Yes
Material classication according to UL 94 standard (vertical burning test)
Certication and product safety
When choosing electrical connector, always make sure to select
reliable and safe, certied connector. The requirements for connectors
used with copper conductors inside switchgears and similar
appliances are specied in standard EN 60947-7-1:2009.
All connectors used inside switchgears or similar appliances must
full these requirements.
The requirements for connectors designated to be used with
aluminium power cables are specied in standard EN 61238-1:2003.
Connectors that have been tested and certied in accordance with
standard EN 61238-1:2003 are divided into two classes.
• Class A (short circuit tested) - usage examples:
feed-in connections, switchgears/appliances, universal
• Class B (not short circuit tested) - usage limited
only to special circuits protected by fast-acting fuses
Ouneva OTL-connectors are tested and certied class A connectors,
that are compatible with copper and aluminium conductors.
For choosing safe and reliable connector, always make sure that the
terminal is equipped with CE and Class A markings with the symbol
of certifying institute, for example FI -mark.
General/use: New OTL 1000 V connector series offers the best quality,
safety and installation features on the market. OTL-connectors are
designed to be used when connecting and branching aluminium and
copper cables.
Materials: Bodies of the connectors are made of aluminium and plated
with tin. Insulating covers are made of UL 94 V-0 class polyamide.
Certification and applied regulations:
EN 60947-7-1:2009, EN 61238-1:2003
Higher 1000 V
AC/DC voltage
rating
1
Tightening torque
labels on the
connector cover
2
Safe UL 94 V-0
class plastic
material
4
Easier installation
with conductor
input collars
3
Places for
component
markers
(5 mm width
eg. Partex Tx)
5
Product documents