Instructions / Assembly

Instruction
1. Please use it in a dry environment. It is compatible with most
junction boxes.
2. Please wear electric insulation gloves(not included) and avoid
scratching the surface of the lamp plate and the electric wire when
installing. Please make sure that the power supply has been cut off
before installation, and conduct a power test before installation. Please
install it by a licensed electrician if necessary.
3. For safe and reliable installation, please make sure that the electrical
box in which the fixture is to be installed is properly connected to the
structural elements of the building.
4. Please do not touch the bulb or look directly at the lighted bulb while
the fixture is open. Please keep flammable materials away from the
bulb.
5. Please use the lamp within the applicable voltage range and clean
lamps regularly. Please cut off the power supply when you clean the
light or replace light bulbs.
6. Please allow the slight color difference caused by the shooting light
and 1-3cm error due to manual measurement, and make sure