Installation Guide

2. WIRING TUTORIAL
1.The wires of the motor are connected
to the wires of the outlet box, and the
black and white wires are not divided
The controller is
built-in and does
not require
disassembly and
installation
into positive and negative poles.
2.Carefully lift the fan joint and place it on
the shaft of the hanger.Make sure that the
hole of the bracket and the structure to be
connected are aligned with the upper
flange of the hanger.After wiring, press
upward and twist to adjust the position of
the screw hole to connect the canopy to
the suspension bracket. Later,Connection
of fixing screws.
3. REMOTE CONTROL INSTRUCTIONS
2